The Advantages And Characteristic Of PP Woven Bag Compared With Same Kind Of Material

Lakos group bag packaging products use the basic raw material for PP raw material, so what are the advantages and characteristics with comparison of other similar material?

PP woven bag is light, good electrical insulation, good corrosion resistance, easy processing and molding. Some general characteristics of PP woven fabric with PP and its own characteristics. As follows:

PP are usually lighter, the density of the plastic woven fabrics is about 0. 0-9. 98 grams per cubic centimeter. Commonly used PP woven fabric, if you don't add packing, which is equal to the density of PP. The density of PP woven application to 0. 0-9. 91 grams per cubic centimeter. Normally basketwork lighter than water.

PP woven fabric for inorganic and organic compounds have good corrosion resistance, under 110 degrees Celsius, for a long time for it has no influence of solvent, grease, etc. Have strong chemical stability. When the temperature rises, carbon tetrachloride, xylene, turpentine oil, etc. For it can swelling. Fuming nitric acid and fuming sulfuric acid, halogen elements and other strong oxide will make oxidation, it to alkali and acid class usually has good corrosion resistance.

At room temperature, PP woven fabric in fact completely is not affected by water erosion, bibulous rate is lower than 0 within 24 hours. 01%, moisture penetrability is low, low temperature, it become fragile, brittle crack. PP woven fabric mildew will not occur. Low friction coefficient between pure PP woven fabric, only 0. 12 or so, as a nylon, to some extent, the friction between PP woven fabric and its objects, with lubrication.